| Type | Teach-in drejebænk |
| Swing in gap (mm) | 1150 |
| Swing over bed (mm) | 890 |
| Swing over cross slide (mm) | 550 |
| Max. cutting length (with turret) (mm) | 1000 / 2000 / 3000 / 4000 / 5000 / 6000 |
| X axis travel (mm) | 455 |
| Z axis travel (mm) | 1150 / 2150 / 3150 / 4150 / 5100 / 6100 |
| Rapid traverse (X & Z) (M/min.) | X:10 / Z:12 |
| Spindle bore (mm) | 106 (std.) / 153, 254, 356 (opt.) |
| Spindle speed (rpm) | 15-1480 (106mm/153mm bore)10-650 (254mm bore)10-500 (356mm bore) |
| Spindle motor (kW) | Fagor: 22/33Fanuc: 22/26Siemens: 22/30 |
| Machine weight (kg) | 9500/10500/11500/12500/13500/14500 |
| Fagor 8055i FL CNC Controller |
| Automatic speed changer |
| Chuck sliding guard with interlock device |
| Gap bed |
| Tailstock |
| Traveling front single door with interlock safety device |
| Coolant system |
| Lubrication system |
| Portable MPG |
| CE Norms |
| Leveling pads |
| Tool set & kits |
| Enlarged 153/230/254/355mm spindle bore |
| Turret (hydraulic or electric) |
| Power turret |
| Quick change tool post |
| Boring bar base/holder |
| C axis |
| Rear chuck mounting preparation |
| Rear chuck guard |
| Manual 3-jaw chuck |
| Hyd. 3-jaw chuck |
| Independent manual 4-jaw chuck |
| Automatic bar feeder |
| Roller steady rest |
| Hydraulic steady rest preparation |
| Follow rest 20-200mm |
| Hyd. tailstock quill |
| Rotating tailstock quill |
| Tailstock end cover with limit switch |
| Full enclosure guarding for 40”/80”/120”/160” length. |
| Chip conveyor + wash down system |
| 5 bar coolant system |
| 20 bar coolant through tool |
| Oil Skimmer |
| Air conditioner for electric cabinet |
| Heat exchanger for electric cabinet |
| EMC |
| Safety Module |
| Transformer |
| Tool holders |
| Fanuc 0iTD with 10.4” LCD display and Manual Guide i includes spindle motor 22/26kW |