| Type | Skråvange drejebænk |
| Max. cutting dia. (mm) | 210 |
| Max. cutting length with turret (mm) | 460 |
| X axis travel (mm) | 215 |
| Z axis travel (mm) | 520 |
| Spindle speed (rpm) | 5000 |
| Bar capacity (mm) | 52 |
| Chuck size (mm) | 210 |
| Rapid traverse (X&Z) (M/min.) | 30 / 30 |
| Main motor (kW) | 11/15 (Fanuc) ; 7.5/11 (Fagor ) 12/15 (Siemens) |
| X axis servo motor (kW) | 1.8 |
| Z axis servo motor (kW) | 1.8 |
| Machine weight (kg) | 3200 |
| Fagor, Fanuc or Siemens controller |
| Hydraulic turret LS-200, 12 stations, regular type top plate |
| Tool holders for regular type disc – 4 sets of blocks for clamping O.D. tools , |
| 2 pcs of face cutting tool holders, 1 pcs of boring bar holder + sleeve 20mm Hydraulic 3-jaw chuck with hard jaw & soft jaw |
| High pressure cooling system |
| Auto lubrication system |
| Work lamp |
| M30 program stop light |
| Hydraulic unit |
| Fully enclosed splash guard with interlock safety device |
| Tool set & box, level pads |
| CE norms |
| Tailstock (with hydraulic quill) |
| LS turret with VDI disc (VDI30/VDI40) |
| Extra tool holder set or VDI tool holder set |
| Enlarged chuck 10” for LT-65 |
| Extra soft jaws or hard jaw |
| Collect unit & collet set |
| Automatic tailstock movement by M code or preparation |
| Manual or Automatic tool setter |
| Auto parts catcher |
| Auto open/close door |
| Chip conveyor |
| Chip bucket |
| Power transformer |
| Bar feeder interface for bar feeder completed |
| Reduction sleeve for bar feeder |
| Heat exchanger for electric cabinet |
| Air conditioner for electric cabinet |
| Safety module |
| EMC |
| Oil skimmer |
| Coolant gun |
| 5 bar or 20 bar high pressure coolant pump |
| C-axis |