TC 2500 serie

Avancerede funktioner, såsom 3 gear med automatisk skift, sikrer højt moment på spindelen. Maskinen kan betjenes som en fuld CNC maskine eller med anvendelse af dialog programmering, såvel som som en manuel maskine. Dens indlæringsfunktion gør let for operatøren at lære betjeningen i løbet af kort tid.

Specifikation

Type

Teach-in drejebænk

Item	Description	Unit	RIC-TC2540	RIC-TC2560	RIC-TC2580
Capacity	Swing over bed	mm	630
	Swing over cross slide	mm	400
	Distance between centers	mm	1000	1500	2000
	Max. weight of workpiece (Chuck + tailstock)	kg	1000 for 3" spindle bore 1500 for 4" / 6" spindle bore
	Max. weight of workpiece (Chuck + tailstock + steady rest)	kg	1500 for 3" spindle bore 2000 for 4" / 6" spindle bore
Travel	X axis	mm	350
	Z axis	mm	810	1310	1810
Spindle	Speed range (3 steps)	rpm	H: 491-2250 H: 331-1500 H: 176-800 M: 126-490 M: 93-330 M: 53-175 L: 27-125 L: 20-92 L: 10-52
	Spindle nose		D1-8 / A1-11 (opt.) / A2-11 (opt.)
	Spindle hole diameter	mm	Ø85 / Ø105 (opt.) / Ø155 (opt.)
	Servo motor	kW	7.5 / 11 (opt.)
Turret (opt.)	Number of tool stations		4T / 8T
	Tool shank	mm	32x32 / 25x25
Feed rate	X axis rapid traverse	m/min.	5
	Z axis rapid traverse	m/min.	7
Slide	Width of bed	mm	350
	Cross slide guide width	mm	220
Feed motors	X axis servo motor	Nm	6.3
	Z axis servo motor	Nm	6.3
Ball screw	X axis (Dia. x pitch)	mm	Ø25 x 5
	Z axis (Dia. x pitch)	mm	Ø40 x 10
Tailstock	Quill stroke	mm	170
	Quill diameter	mm	Ø75
	Quill inside taper	MT	5
Coolant	Pump motor	HP	1/6
Weight	Net weight	kg	3200	3600	3900
	Gross weight	kg	3430	3870	4215
Packing size		mm	2850x2050x2120	3400x2050x2120	3850x2050x2120

Standard tilbehør

STANDARD ACCESSORIES

● With FAGOR control

● Main spindle inverter motor

● FAGOR X & Z servo motor

● Coolant equipment

● Automatic lubrication system

● Work light

● Manual tailstock

● Full guarding: TC2100 / 2500 / 2660 /

● 2680 / 26120

● Half guarding: TC26160 / 26200

● Chip tray for TC2600 only

● 2 Hand wheel or M.P.G. for FAGOR only

● M.P.G. for FANUC / SIEMENS only

● Tool box & tools

Ekstra tilbehør

OPTIONALG ACCESSORIES

● Chip tray for TC2100 / 2500

● Chip conveyor + cart

● Steady rest

● Follow rest

● 3-Jaw chuck

● 4-Jaw chuck

● Hydraulic chuck

● Collet chuck for TC2100 / 2500

● 4 Position manual tool post

● 4 Position elec. tool turret

● 8 Position elec. / hydraulic tool turret

● Hydraulic tailstock

● Spindle oil cooler

● Gap type bed

● Boring bar device

● Heat exchanger

● Crane lifting device

● M.P.G. + 2 hand wheel for FAGOR only

● FANUC / SIEMENS / MITSUBISHI controller

* Please refer to quotation for full options

Inklusiv

Specifikation

Standard tilbehør

Ekstra tilbehør