| Type | Vertikal bearb. center , linær HSM |
| Table size (mm) | 900 x 520 |
| Max. table load (kg) | 800 |
| X axis travel (mm) | 800 |
| Y axis travel (mm) | 500 |
| Z axis travel (mm) | 500 |
| Spindle taper (ISO) | ISO#40 / HSK A63 |
| Spindle speed (rpm) | In-line: 12000 (std) ; 12000/15000 (opt)Built-in: 18000 / 24000 |
| Main motor (conti./30min.) - Heidenhain (kW) | 10 (H.H. iTNC530) / 7.5 (Fanuc, H.H. TNC620) |
| X/Y/Z Rapid feed (M/min.) | 32 (std.) / 48 (opt) |
| Guide way type | Roller type linear way |
| ATC (option) (Tool) | 24 arm type |
| Machine weight (kg) | 5000 |
| CNC controller model Fanuc 0iMD or 31iMB, Siemens 828D, Heidenhain iTNC-620 or iTNC-530 |
| Spindle oil cooler |
| Central lubrication |
| Working light |
| Wash down device |
| CE declaration conformity for EU countries |
| Lamp of cycle finish and alarm |
| Ethernet |
| Tool kit, leveling bolts, pads and nuts |
| RS232 port |
| Portable MPG |
| Heidenhain software option 2 (Except with TNC620 controller) |
| EMC and safety module for machine with H.H. controller |
| Heat Exchanger |
| Pneumatic counter weight |
| Smart Machining technology |
| Built in type coolant through spindle with 20 bar pressure |
| Extra cost for CTS/20 bar with separate CTS tank |
| Extra cost for CTS/70 bar with separate CTS tank |
| HSK63A from SK40 for 15000rpm |
| X/Y/Z 42M rapid feed with oil coolant through hollow shaft ball screw |
| Chip conveyor without chip bucket |
| Chip bucket |
| Oil skimmer |
| 4 bar (60HZ) high pressure coolant pump for spindle nozzle |
| Coolant gun |
| Air conditioner for electric cabinet |
| EMC for Fanuc/Siemens controller |
| Safety module (for Fanuc/Siemens controller) |
| Power Transformer |
| Heidenhain TS-740 + SE640 work piece probe |
| Heidenhain TT140 Touch Probe |
| Tool setting probe Renishaw TS27R |
| Work piece probe Renishaw OMP-60 |
| Non-contact tool setting probe Renishaw NC4 |
| Tool probe BLUM Z-3D |
| Work piece probe BLUM TC50 |
| Laser Control tool probe BLUM NT-A3 |
| 4th axis wiring preparation (without software, servo motor & driver) |
| 4th axis complete with table and cables |
| 3 axes linear scale |